Portable rechargeable table stand
This stand is ideal for celebrations at home and you can easily move it to different positions around the room to get a nice mix of video angles. With the integrated battery in the stand, you will get three times longer recording time so the fun continues.
Suction cup mount
This mount is ideal for outdoor events such as barbeques and pool parties as you can fix it on any glass door or window. It works perfectly with the waterproof case so you don’t have to worry about rain of if the camera gets splashed on.
Connect simultaneously to two mobile phones
A2DP 1.2, Hands Free (HFP), AVRCP 1.4, HFP 1.6
Version 3.0, 300ft extended range
Quick Battery Check
15 minutes for up to approximately 2.5 hours talk time
Up to 8 days
Up to 6 hours
Automatic volume adjustment
Advanced voice prompts
CrystalTalk™ for headsets
49.72mm x 17.83mm x 17.68mm (boom open); 39.53mm x 17.83mm x 17.68mm (boom closed)
9 grams (with ear-tip & hook)
IN EAR + HOOK
Power on the Camera and make sure that the Camera is disconnected from Hubble Connect for VerveCam App. To disconnect the Camera from the App, you can close the App or turn off the Camera and turn it on again. Connect the Camera to your computer’s USB port. Your computer will recognize the Camera as a mass storage device. You can then drag and drop your files, just like other external devices. To exit mass storage mode, unplug the USB cable.
1. Download & Install Hubble Connect for VerveCam app on your smartphone for free at the App Store® or Google Play™. 2. Open the App. 3. Follow the in-app instructions to connect the Camera with your smartphone. 4. The Camera ID is printed on the back of the Camera. YOUR CAMERA’S DEFAULT PASSWORD IS “00000000”. 5. When connected, you will see the home screen.
Smartphone: iOS 8.3 (or higher) or Android™ 4.3 (or higher) Not supported on iPad and Android tablets.
Connect the power adapter to an electrical outlet and insert the plug into the micro-USB socket on the underside of the Camera. Only use the power adapter (5V 1A) with the micro USB plug. Note: If the Camera is OFF, the LED indicator lights up in red when charging and goes off when the battery is fully charged. It takes about 6 hours to fully charge the battery for the first time. You can continue to take photos or record videos when the Camera is charging. The Camera will issue a voice prompt to warn you that it is powering off when battery is low.
In the event that you experience a device issue or you've forgotten the password you've set, you can do a factory reset of your Camera using the Reset button (located next to the microSD card slot). To restore the camera to its factory default settings, hold down the Reset button for 3 seconds. The 3 mode indicator LEDs will light up for about 30 seconds. Restoring the Camera to its factory default settings removes all data and settings you have made on the Camera and the App installed on your smartphone. Note that it will not erase the photos and videos you have stored on the microSD card.
(1) All talk and standby times are approximate and depend on network configuration, signal strength and features selected.
(2) Requires a compatible Android™ or iOS® device with Bluetooth® capability.
(3) This device supports Bluetooth® A2DP, Hands Free and AVRCP profile(s); compatible Bluetooth devices must use the same Bluetooth profile. Not all features may be supported.